![[Position Filled!] Position for electronics technician](https://www.cps-power.com/wp-content/uploads/2020/08/soldering-805187_1920.jpg)
[Position Filled!] Position for electronics technician
This position has been filled! This position has been filled!
Hybrid system on chip for standby battery monitoring
Here’s one we did earlier! This project is a realisation of the principles set forth in a whitepaper (written by our Nigel Scott). This battery …
The effect of noise & ripple current on stationary lead acid batteries
Although noise & ripple currents occur in many (stationary) standby battery systems, there is a certain amount of controversy about their effects on lead-acid cells; …
Website facelift
Unless you’re reading this from your RSS reader, you’ll have noticed our CCPS website has had another facelift! Although we liked the old site, it …
THR project background
In 2012, a pilot scheme was initiated by Hydro Tasmania to establish a suitable, non-destructive monitoring technique to determine the health of steel cables in …
![[Position Filled!] Another software development position](https://www.cps-power.com/wp-content/uploads/2021/04/pexels-cottonbro-6143829-496x300.jpg)
Equal opportunity employer
Custom & Contract Power Solutions strives to get the very best candidate for a role. We believe that being an equal opportunity employer will help …
[Position Filled!] Electronics technician position
This position has been filled! Who we are Custom & Contract Power Solutions is a forward-looking and innovation-led company. We own Intellectual Property (IP) in …
![[Position Filled!] Software development position](https://www.cps-power.com/wp-content/uploads/2020/07/computer-1185626_1920.jpg)
[Position Filled!] Software development position
This position has been filled! Who we are Custom & Contract Power Solutions (http://www.cps-power.com) is a forward-looking and innovation-led company. We develop bespoke products for …